AMAT Centura HDP 8 inch System

 - Exact Model Type? AMAT Centura HDP 8 Zoll System

 - Please provide as much as possible. Modified Matchboxen; Adixen Turbo Pumps; MAGPOWER Turbocontroller; WTM-ESC; WTM Controller OR 4000; Orienter-Chamber with Centering Ring; autom. Swing in Loadlocks Narrowbody; PEC-Wafer Option; Single Loop 3 channel SMC Chiller INR-498-011D

 - Current Condition: Excellent/Very good/Good/poor/Very poor › Exellent

 - Completeness: Total/partial/Donor tool? Please list missing parts. The system is currently still fully connected to production and is running productively

 - Manufacturing date of the Equipment ? › Manufacturing date 1999

 - Technic special customized? Pec-Wafer Option; Heatable Turbo-Pumps with MAGPOWER Controller; new Turbo Gate Valves; Logitex Handler supervising system; Electrical gas lockout system; Clearwindow at port D;

 - Correct maintained? The facility was used for automotive engineering and all necessary preventive maintenance was always carried out here

 - Any damages/deficits known? The system is in very good condition, only comes from production due to underload in this work center and space requirements in the clean room

 - Manuals existing? The AMAT company hasn't had any manuals for a long time, everything is made available on their home page!

 - Current storage location/storage condition?

 - Last time in production/function? Still in Production

 - Crated: If yes…/ professional with protocol / partly / simple? 3 process chambers; 1 oriented chamber; automatic loading cassettes ; WTM chucks; Heated turbopumps; PEC wafer option; ENI RF generators every 3 chambers; New chiller from SMC; Vita Controller with 3 monitors; 300mm top nozzle;

 - Detailed Configuration/Specification of the tool › Any upgrades / extensions? see point before

 - Useable for which products? automotiv products

 - Wafer size (if applicable)? › 8 Inch

 - Any consumables at end of lifetime? No

 - Procured from OEM or from second hand? seconed hand

 - Any refurbishments done? Not necessary, because the system was completely overhauled in 2014

 - Any doubts that the tool is failure free useable for the next three years? There is a risk that the tool will soon have a disruption, for us the system is still fully in production and that is exactly how it was maintained in PM trigger. We Only recently learned that the tool will be taken out of production

 - Was there a significant system failure in the last three years? The system has had very good uptime over the last 3 years

 - Used: 7_24 / 8 hours a working day / for development /rarely? The system is in productive use 7/24; Of course, development lots were probably also run here and there, but after that the plant was used again for production

 - Any contaminations known? No, still in Production automotiv Products